I want to introduce to you today the location on which a car tracker might be installed in a car. It has a relatively powerful function that can Kill the car’s engine remotely by sending a command to the device to disconnect the oil circuit through the mobile phone.
The relay and circuit are controlled to achieve the purpose of killing the car’s engine. So with such powerful features, is there any tracker in your car? Or Where is the car tracker installed?
What is GPS Tracker?
Car positioning tracker, also known as GPS tracker, is mainly a car’s anti-theft GPS positioning product. The car tracker’s functions generally include SMS positioning, timing positioning, network query, remote monitoring, and remote locking of the car.
Where is Car Tracker installed in a Car?
There few places in a car where the tracker is installed. These tend to be the places where finding it is not easy. The recommended installation positions in the car are as follows.
- Under The rear windshield brake light.
- Trunk.
- Inside the Front Bumper.
- The Wheel Wells.
- The Dashboard.
- Inside the Fuse Box.
- The foot of the main driver’s steering wheel.
- Under the main and co-pilot seats.
Related Content: Top inside vehicle cleaning tips for scaled-down taxis and chaffers
How is a Car Tracker Installed?
Before installing a tracker in a car, make sure whether the tracker package materials are complete, including the whole machine, battery, certificate, and manual commands list.
As far as installation is concerned, a fairly discreet solution is needed to prevent the thief from disassembling the device before the assets are recovered. To achieve this, many models opt for magnetic mounting.
Some general-purpose GPS trackers are nevertheless designed to be content with the storage compartment.
But long before the installation of the device, you must configure it depending on the model.
Zones, Zone entry, and exit alerts, the interval for taking a position, and creating alerts linked to motion detection, Overspeed, theft, and finally, define the modes notification (email, SMS, Push Notification, sound signal) needs to be defined.
Do not forget to change the default password, check the SIM card’s compatibility, record the GPS equipment number, and finally recharge the battery because these are essential prerequisites for installing the GPS tracker.
Where to place a car GPS tracker?
We recommend that you not place the tracker near a heat source such as the engine or the exhaust system. Indeed, most models do not support a temperature higher than 70 ° C (158 ° F). An excessive heat source could cause the melting of your GPS tracker. Conversely, it is also not recommended to use the device when the temperatures are shallow. This could deteriorate the GPS signal’s reception and thus provide you with imprecise or inaccurate data.
Besides, the car’s interior can cause problems with the GPS transmitter and receiver, so it is not recommended to place your GPS tracker within it to avoid jamming the waves. The Tracker has a strong magnet, so we recommend installing it inside the body of the vehicle you want to follow, at the wheel arch, or even under the automobile’s fender for optimal geolocation.
Finally, you will have to choose between two types of power supply, either a rechargeable lithium battery or a model that must be plugged into the vehicle’s OBD socket (diagnostic socket located between the steering wheel, the pedals, and the cigarette lighter of the vehicle).
The battery-powered tracker’s advantage is that it is completely self-contained, so the vehicle does not need to be turned on for it to operate. Therefore, this is particularly useful if thieves decide to take your property since you can locate the stolen vehicle very easily.
However, their autonomy is not unlimited, so you will have to recharge it. Power-operated trackers activate only when the engine is powered up. The advantage of that is it does not require recharging. You can therefore leave it in place permanently. However, if the vehicle is stationary or an engine shutdown, the tracker will not activate, and it will be impossible to locate the target. Therefore, this type of device is recommended if you want to plot only the routes taken by the vehicle.
Related Content: The Essential Features of a GPS Security Device For Your Vehicle
How to activate Car Tracker?
To be able to receive and transmit information, the GPS tracker requires a SIM card. You must acquire it independently of the tracker because it is generally not supplied with the device.
Place this SIM card in a GSM or smartphone and deactivate the PIN code. This step is significant because, without it, your tracker will not work. You will then have to open the tracker by unclipping it or using a screwdriver depending on the model, then place the sim card inside.
Then you just have to link the card to your mobile phone either by dialing the number of the latter and/or by sending a message (SMS). You will then receive a notification message telling you that your devices are now paired. However, this last step varies depending on the model; we, therefore, advise you to refer to the product’s instructions for use. Once activated, all you have to do is install the product and track the vehicle.
Final Say
Finally, I would say that a Car Tracker is necessary nowadays if you care about your car’s safety. And a Car Tracker offers many features to keep you alert and help you monitor the vehicle’s activity.
It can also be used to manage your fleet of cars to run your business with ease.
Hope you like our research on Car Tracker. Thanks.
