You may have heard of a pipe repair system known as Pipe relining or CIPP, a Cured-In-Place Pipe Lining system. But do you know what it is and how exactly it works? Well, you should, as we think that if your pipe needs any repair pipe relining Eastern Suburbs is the method you should choose from now on.
Wish to know more? Then read on as we discuss Pipe relining and how the process works. So let’s get started!
What Is Pipe Relining?
The process of repairing your pipes from the inside by curing them with the help of a special resin is known as Pipe relining. It cures with time to make a stronger pipe than your original one.
The resin is the critical component in this process. Your plumber will make a resin-saturated felt tube with fiberglass or polyester for resin impregnation and then insert it inside the damaged pipe. The resin will harden and form another pipe inside the previous one.
Most companies like Streamline Pipes insert the resin through the upstream access point. One can insert from the downstream point, but it is considered risky and, thus, avoided.
Pipe relining is considered a better alternative than the previous “dig and replace” pipe repair methods. This method is minimal, requires no digging, and is a trenchless technology. It also makes it less intensive and more cost-effective.
How Does It Work?
- First, the pipes are tested and inspected to see how badly they have been damaged. Closed-circuit cameras have traditionally been utilized for this. But now, FEL or forced electron leak location technology is being employed to study the damage more closely to build better remedies.
- The next stage is to clean the clogged pipes, a multi-part process. It is first cleaned according to standard procedures, and then any solid or big clogs are removed. Robotic cutters are commonly used. Finally, a high-pressure water jet is utilized to finish cleaning and guarantee that the pipe walls have a good surface for the resin to set on.
- The pipes are then checked one more time, usually using closed-circuit cameras, to ensure they are ready to be relined.
- The lining length is now calculated based on the length of the pipes and the level of their deterioration.
- The pipe is soaked with epoxy resin after the length has been determined. It means that the resin will fill the entire length of your pipes, which will become the pipe after curing. In this phase, straighter and larger pieces of pipe are easier to work with than complex junctions and T-sections.
- Next comes the curing phase, the longest step in the entire process. It can be done manually or with hot water to speed up the process. Finally, UV radiation is employed to harden the cured lining.
- All connectors and inspection pits are cut before the procedure is finished. Robotic cutters are used to remove joints in this procedure; however, inspection pits can be dealt with with grinders or other surface-level cutters.
- Finally, the pipe relining is finished. Check that your pipes are working correctly after the pipe relining service has finished the final checks.
Conclusion
Thus we can conclude that pipe relining eastern suburbs is an excellent method of repairing your pipes. So the next time your pipe bursts, avoid the mess of traditional pipe fixing. Get hold of a reliable company and repair it using the CIPP system!
