Looking it strange to meet the guidelines? Yes, if you want to make the most of your water heater, then it is mandatory. If you hire a professional hot water repair and installation company, then their experts will help you throughout the process from choosing a heater to installing it effectively. However, if you are managing all the things yourself, then you need to be active to take care of all the important aspects. After all, a water heater is one of those appliances that need a compatible installation, hassle-free working, and an exceptional design to meet electric needs.
In this blog, we will help you know how you can safely install a water heater and enjoy the warm water this winter! Hopefully, you enjoy reading thoroughly and ask us your doubts at the end of the post!
What are you looking around? Let’s get started reading!
Table Of Contents
- 8 Steps to install a heater
- Get all the required Tools & Materials
- Switch OFF the Gas & Water
- Drain the Hot Water from the Tank
- Cut Off all connected the Water Lines
- Connect the New Relief Valve
- Attach Connectors & all pipes
- Reconnect the Gas Lines & fill the tank
- Check the Vents & light the pilot light
- What will be the total installation cost?
- Final Remarks
8 Steps to install a heater
Get all the required Tools & Materials
The first and the foremost tip that you must implement while installing the heater is buying all the mandatory tools and material. Here we have listed some of the most required tools that you must buy. Keeping these tools around you while installation will help you have a safe and hassle-free installation.
- Pipe Wrench
- Plumber’s Tape
- Garden Hose
- Multiple Wrenches
- Soldering Torch
- Metal Screws
- Tube Cutter
- Solder
- Pressure Relief Valve
- Pipe Connectors
- Screwdriver
- Discharge Pipe
Switch OFF the Gas & Water
Now, when you have bought all the essential tools and accessories, it’s time to move ahead to the next step that is turning OFF the gas and water. Doing so will help you prevent leakage and run a smooth installation process. If you keep it turning ON, then you can face a dangerous situation that can even lead to major health issues. This is why it is important you turn OFF the water and gas while starting the installation process.
Drain the Hot Water from the Tank
Before replacing or removing the hot water tank, make sure you empty it. It is advisable to drain your hot water tank using a garden hose appointed to the drain valve. If you are thinking the water will not be so hot! It’s your misconception! It will be very hot and you have to drain it carefully. Wear safety gloves, wait for at least one hour after turning OFF the water and gas, and then using two wrenches, disconnect the gas line from the hot water heater. Make sure you have disconnected all the main connections that can put you into major troubles.
Cut Off all connected the Water Lines
Now, it’s time to detach all of your old heater’s water lines. Using a tube cutter, you can easily cut the hot and cold water lines.
Connect the New Relief Valve
Know your new temperature & pressure relief valve carefully and wrap the end with the plumber’s tape. After that position, the valve in the new hot water heater screws it in with a pipe wrench, and finally connects a new copper pipe to the relief valve.
Attach Connectors & all pipes
Now, attach new copper adapters, all copper tubes to the new water heater. Before attachment, make sure you add some plastic connectors to defend against electroplated pipes. After that take adapters & screw all the connectors & pipes into the hot water inlet ports. Along with this, you are also advised to reconnect the vent using rightly sized metal screws. It should connect right above the valve hood.
Reconnect the Gas Lines & fill the tank
Now, reconnect the gas line thoroughly. Make sure you don’t forget to cover the end of it with the plumber’s tape. Using two pipe wrenches, you can easily reconnect the gas line to the new water heater and start filling out the tank. Just turn your hot water faucet ON and allow it to work as you want to refill the tank. Once the tank is full, switch OFF the faucet and check the discharge pipe on the pressure relief to ensure it’s not leaking.
Check the Vents & light the pilot light
The last step that you need to perform while installing the hot water heater is checking out the vents thoroughly and lighting up the pilot light. If you don’t know how to check both of these gently, then you can read the user’s manual, given by the manufacturer along with the heater’s box. It is advisable to set the heater’s temperature to 120°F so that it doesn’t get damaged early and you can use it in the long run.
What will be the total installation cost?
Many people assume that the installation cost is quite high but nothing like this. It varies from manufacturing company to company and brand to brand. However, then the general installation cost can be expected at around $800.
Final Remarks:
Hopefully, you now have understood the steps to install a water heater this winter. If you have any doubts about the steps mentioned above, then you can ask us without any hesitation. However, if you also want to know more about the installation cost and the other expenses, then you can also comment below. We will listen to your queries and get back to you with the best answers possible.
In addition to all of it, if you want to install the hot water heater and cannot manage all the things alone, then it will be better to consult & hire the professional hot water services nearby you. The professionals of the leading companies will help you know the exact process of the heater’s installation and will let you know the different aqua max hot water heater’s price as well.
Hopefully, you have enjoyed reading. Kindly hit like and do share!
Thanks for reading!
