Being an Internet Service Provider (ISP) is a rewarding job. But starting a new service takes a lot of dedication. The major drawback is the amount of money required for equipment and space to build.
Plan the location of your relay beacon, then invest in high-quality equipment to provide your users with a fast internet connection. Maintain your settings to keep your service stable and expanding.
Find the Right Building to Support Your Isp’s Data Center
The ideal location for your data center is the top floor of a high-rise. Setting up your service at high altitudes allows the antenna wireless signal to travel further. Data centers must also be maintained with fiber optic internet cable. You need these cables to set up your service.
Find a data center near you. Ask to rent roof space for your equipment. Some data centers also sell high-performance Internet connections called Dedicated Internet Access that you can use instead of fiber to power your business.
Find your local fiber optic internet service provider to find out where the fiber optic cable is located. Ask them about their network and if it reaches your potential data center. Also, talk to the building owners and other tenants for more information.
If the data center location is not close to quality fiber, you will have to pay your internet service provider to install it. This is expensive so you should look for a place that already has good upstream fiber-optic connections.
Find Other Highlights to Install Your Relays
These highlights pass your data center ISP signal to your customers. Drive around your neighborhood and use an online map to pinpoint potential rental locations. Radio towers, water towers, hills, mountains, tall buildings, and even a few houses are also worth considering. Visit these places in person for great views.
You must be able to see the client’s house from the tower or the signal will not reach him. Hills, trees, and other buildings can make this more difficult.
Focused on serving about 50 customers for each relay tower. Expect a loss of money if you place relays in areas with not many homes. Major Internet service providers avoid rural communities for this reason.
Wireless Signal Distribution Relay Antenna
To create a faster internet connection when the towers are far apart, fiber optic cables can be laid on the ground. Building fiber-optic networks are very expensive, so most people stick to wireless technology.
Negotiate Your Data Center Rental and Relay You need to rent space for every part of the network you want to set up, so be prepared to negotiate a lot. Keep track of property owners by visiting them or looking through public records. Then ask the owner to give you permission to install the device, your ISP expects to pay $ 100 to $ 500 a month for each rental.
Keeping track of property owners can be difficult. You may need to find another point to place your relays.
Use your network to bargain Promise to provide free internet property owners. Most people will give you a lower monthly rent for your problem.
Establish an Upstream Fiber-Optic Connection with Your Internet Service Provider
Research your local upstream business to compare prices. Try to run services at speeds of 1 gigabit per second. Such a fast connection allows you to create an Internet service for 500 to 800 customers, installation takes about 90 days and the fiber service costs 1,000 to $ 3,000 per month.
If you can’t find a building where fiber optic cable is already available, your ISP will need to come out and connect to your data center. Indoor wiring often costs more than the US $ 15,000.
Most ISP services provide 2 to 5 upstream connections to provide fast and consistent service.
Purchases of carrier equipment
Buy an access point device for each relay point
Count the number of relay positions you have chosen and start shopping for a router or switch. These components allow users to connect to your network. Switches are cheaper than routers. But routers have more functions.
Routers and switches are available at many electronics stores. It is also available through online suppliers. The base model starts at around $ 50, but larger, faster boxes often cost hundreds of dollars.
A router is used to connect to a network. You can use a router to create a network of clients in one area. Each customer is connected to your network via a dedicated IP address that is easy to trace. Routers perform better for Wi-Fi systems than switches.
Better switches for one network If you are building a small ISP in a certain area, a switch may be a better option than a router. Each user is assigned a separate MAC address, switches work better when wired.
Buy Customer Equipment (CPE) to install in the Customer House The CPE fits on the customer’s roof by connecting to the nearest router or access point switch. All customers must have a CPE to connect to your ISP service. The CPE is connected to the customer’s home switch or router.
Find low-cost online vendors such as Ubiquiti, MicroTalk, and Mimosa for CPE devices and standard satellite antenna antennas for around $ 100. The more expensive versions typically provide a stronger Internet signal and have a longer range.
Remember the type of roof your customers are likely to have. Every CPE satellite is different. Many satellites are bolted through the roof. But you cannot penetrate the flat roof without damaging it. Buy a weighted mount without punch for flat roofs.
Most companies that sell access point equipment also sell CPEs and backhauls. If possible, you can shop with the same company for better customer support during installation.
Select wireless backhauls to help distribute your wireless signal
Wireless backhaul keeps customers connected to your relay point. It helps in sending data from customers to your network. Use backhauls to connect to customers that your routers and switches normally cannot access.
Look for backhauls from such as Siklu and Bridgewave. Good wireless devices usually cost $ 200 and up.
Install the backhaul the same way you would install a router or switch. Install wireless blackholes on top of towers, buildings, and other high-rise buildings to improve the quality of your network.
Buy customer management software to track your network
A good ISP needs a user-friendly way to answer questions, track data usage, submit bills, and other tasks. To make it easier, choose a system with all the features you need. There are many options, including some free options. Install the program on your data center computer to monitor your network and troubleshoot if something goes wrong.
